Contact 
Replacement remote control OBELINK Hypercamp Excellent Automatic - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote OBELINK Hypercamp Excellent Automatic. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
Pairing the Remote Control with the Hypercam Excellent automatic control box:
- Turn on the control box and the remote control.
- Press the RESET button on the control box; all 3 LED lights on the control box will start flashing slowly.
- Simultaneously press the FORWARD and REVERSE buttons on the remote control and hold them for about 3 seconds (see picture below). You should then hear a short beep confirming successful synchronization. After successful synchronization, the green LED light on the remote control and the green LED light on the control box will continuously illuminate.
NOTE: If no signal is received from the control box, you will hear regular beeping from the remote control buzzer.
Replacement remote control OBELINK Hypercamp Excellent Automatic - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote OBELINK Hypercamp Excellent Automatic. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
Pairing the Remote Control with the Hypercam Excellent automatic control box:
- Turn on the control box and the remote control.
- Press the RESET button on the control box; all 3 LED lights on the control box will start flashing slowly.
- Simultaneously press the FORWARD and REVERSE buttons on the remote control and hold them for about 3 seconds (see picture below). You should then hear a short beep confirming successful synchronization. After successful synchronization, the green LED light on the remote control and the green LED light on the control box will continuously illuminate.
NOTE: If no signal is received from the control box, you will hear regular beeping from the remote control buzzer.
Featured Products
Radio range extender for remote control IR signal integrated in the battery - UFON 433 MHz
General DUREMOTE 2 tailor made remote control with button printing on demand
General MAGIC - remote control for SMART TV with keyboard and air-mouse function
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.
