Replacement remote control Powrtouch Evolution Motor Mover Remote Control Handset Single Axle. CDFMD Type - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote Powrtouch Evolution Motor Mover Remote Control Handset Single Axle. CDFMD Type. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
It is necessary to pair this remote control with your control box:
- With the remote control turned off, turn on the main control box, it’s green LED (A) should be illuminated.
- Locate hole R on top of the blue case along from LED’s A & B. See photo below. You will need a small long implement to insert into hole R and feed down until it hits the reset button directly below the hole. Push lightly, this will start the syncronisation process and green LED (A) & red LED (B) on the box will flash alternately.
- With the red and Green LED flashing, turn on the remote control, and after about 4 Seconds, the main control box should respond to the movement buttons on the remote control.
PLEASE NOTE:
You must turn on the handset within 20 Seconds of releasing the reset button.
Featured Products
General BAR silver - simple remote control
General ZOOMY Remote control with big buttons for seniors, kids
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.