Contact 
Replacement remote control TRUMA GO2 RH 1 - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote TRUMA GO2 RH 1. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
It is necessary to pair this remote control with your control box:
- While you have the remote control turned off, turn on control box. It’s red LED starts to flash slowly.
- Press and hold the reset button on the control box, after about 2 seconds, the red LED starts to flash faster, keep the button pressed and after a further 5 Seconds, the LED speeds up yet again. Now release the button.
- On the remote control old down the REVERSE button and turn on the remote control, you should hear a long beep from the remote control followed by a chatter of relays. The reverse button can be released and the remote control is now synchronised and ready for use.
NOTE:You must turn on the remote control within 5 Seconds of releasing the reset button.
Replacement remote control TRUMA GO2 RH 1 - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote TRUMA GO2 RH 1. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
It is necessary to pair this remote control with your control box:
- While you have the remote control turned off, turn on control box. It’s red LED starts to flash slowly.
- Press and hold the reset button on the control box, after about 2 seconds, the red LED starts to flash faster, keep the button pressed and after a further 5 Seconds, the LED speeds up yet again. Now release the button.
- On the remote control old down the REVERSE button and turn on the remote control, you should hear a long beep from the remote control followed by a chatter of relays. The reverse button can be released and the remote control is now synchronised and ready for use.
NOTE:You must turn on the remote control within 5 Seconds of releasing the reset button.
Featured Products
Radio range extender for remote control IR signal integrated in the battery - UFON 433 MHz
General DUREMOTE 2 tailor made remote control with button printing on demand
General MAGIC - remote control for SMART TV with keyboard and air-mouse function
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.
