The remote control WHY EVO is a replacement radio multi-frequency universal remote control that allows you to operate up to 4 gates, doors, blinds, and lighting in your home or apartment.

The RF remote control WHY EVO fully replaces any original remote control with a frequency range of 280 MHz to 870 MHz with both fixed and floating (rolling) codes.

• It can combine up to 4 different brands/manufacturers and models of various frequencies into one remote control.
• It can handle both fixed and FLOATING (rolling) codes.
• Multi-frequency auto-scan remote control 280-868 MHz.
• Copying/cloning the transmission code/protocol from the original remote control.
• Supplied with a CR2032 battery.

Operating temperature range:

• Remote control range: 60 m in open space, 25 m within a building.
• Degree of protection: IP40
• Dimensions: 57 x 41 x 9 mm

CODE DUPLICATION PROCEDURE

1. Press and hold button 1 on the WHY EVO and then press button 2 4 times.
2. Release both buttons. The red indicator LED on the WHY EVO remote will blink briefly every two seconds.
3. Place the original remote you wish to duplicate in front of or next to the WHY EVO remote.
4. On the original remote, press and hold the button you want to duplicate. Keep the button pressed on the original until the green indicator LED on the WHY EVO remote flashes quickly.
5. At this moment, press the button where you want to save the code. The green LED on the remote will briefly light up and then turn off. This confirms that the code has been successfully saved to the selected button.
6. The copy has been successfully created.
7. (Fixed code) The copy of the remote control is done and ready for use.
8. (Floating code) The copy has been successfully created, now the new WHYEVO remote needs to be registered with the receiving unit. The procedure is described in the manual for the receiving unit. If you need help, we won’t leave you in a bind - contact our technician via email.