Replacement remote control ENDURO EM303A AutoSteady, EM405 Smart AutoSteady, AS201A, AS201B, AS201FL - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote ENDURO EM303A AutoSteady, EM405 Smart AutoSteady, AS201A, AS201B, AS201FL. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
Pairing the Remote Control with the Hypercam Excellent automatic control box:
- Turn on the control box and the remote control.
- Press the RESET button on the control box; all 3 LED lights on the control box will start flashing slowly.
- Simultaneously press the FORWARD and REVERSE buttons on the remote control and hold them for about 3 seconds (see picture below). You should then hear a short beep confirming successful synchronization. After successful synchronization, the green LED light on the remote control and the green LED light on the control box will continuously illuminate.
NOTE: If no signal is received from the control box, you will hear regular beeping from the remote control buzzer.
Featured Products
General BAR silver - simple remote control
General ZOOMY Remote control with big buttons for seniors, kids
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.