Replacement remote control SOMFY Telis Soliris R-T-S (Telis Soliris RTS) - 100% replacement 1:1 of the original remote control.

The remote control has been specially developed for the following SOMFY models: 1810634, ALTUS 40 RTS, ALTUS 50 RTS, ALTUS 60 RTS, TELIS SOLIRIS RTS LOUNGE, TELIS SOLIRIS RTS PATIO, TELIS SOLIRIS RTS PURE, TELIS SOLIRIS RTS SILVER, TELIS-SOLIRIS-RTS-LOUNGE, TELIS-SOLIRIS-RTS-PATIO, TELIS-SOLIRIS-RTS-PURE, TELIS-SOLIRIS-RTS-SILVER, TELISSOLIRISRTSLOUNGE, TELISSOLIRISRTSPATIO, TELISSOLIRISRTSPURE, TELISSOLIRISRTSSILVER. (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. The verified compatibility is guaranteed by us.)

This remote control is available on branded remote control General ROLO (shown on the left).

General ROLO is a remote control replacement that allows you to control blinds, awnings, roller shutters and many other SOMFY devices in your house. It is a replacement radio remote control which you can control up to 5 independent motors or 5 combinations of motors.

PROPERTIES AND TECHNICAL SPECIFICATIONS:

• Unique white and transparent ABS material gives it a stylish look.
• Operating frequency: 433,42 MHz (RTS)
• It has basic functions the same as original Somfy (up, down, stop, tilting of the blades)
• It has 5 channels
• Simple pairing method if you have one existing paired remote. It can also be registered to the engine as the first remote control.
• Package dimensions: 151 x 43 x 20 mm
• Dimensions exc. wall mount: 143 x 39 x 15 mm

PAIRING PROCEDURE:

In case you have a paired remote control home, use pairing procedure described below. In case the paired remote control is no longer available the pairing process will require you to disconnect and reconnect your drive unit from the power source. The procedures and tips on how to do so may be found in the included manual or in the PICTURES ABOVE

1. Press the programming button on your paired remote control and have it held until the Jog = Slight up and down movement.
2. Select the channel you want the drive unit to be programmed on, on the General ROLO remote control (you can switch between the channels using LEFT and RIGHT buttons).
3. Press the programming button on the new General ROLO remote control and have it held until the motor jogs.
4. The General ROLO remote control is successfully paired and controls the motor drive.

The remote control is not intended for programming or setting the motor. It is only used to control the motor.

PACKAGE INCLUDES:

• General ROLO remote control
• Wall mount
• CR2032 battery
• Manual