Sophisticated remote control signal decoder for accurate functionality testing. The tester not only diagnoses whether the remote is transmitting infrared light, but also decodes the signal and displays the codes on a large display so you can quickly verify that the remote is transmitting the correct code. You can use it to see which remotes are interchangeable/compatible. An essential tool for all electronics service and repair shops.
Infrared Signal Decoder - Features:
1.Tests IR remote controls.
2.Decodes the IR remote control signal.
3.Distinguishes the protocol (= IC type) of the transmitted signal (e.g. 9012 is Toshiba's protocol or for example SAA3010 for RC5 by Philips or NEC6121 is a very common protocol by NEC etc..... all protocols are in the attached instructions)
4.Display the decoded data and protocol on a large display (SYStem code, DATA code, IC=protocol)
Features:
Large display.
Audio and visual signal indication.
Very simple intuitive use - even an amateur radio operator can quickly understand the principle of IR signal transmission by following the enclosed instructions.
There is nothing like it on the market, other testers only verify whether the signal is transmitted or not, but you can verify this with any camera or camera through whose optics you can see the invisible IR (infrared signal).
The problem arises when the remote control is transmitting something, but you don't know what. The remote control that is transmitting may still be faulty. This decoder will detect problems with the remote transmitting, but at the wrong code or frequency. Use the attached table to quickly check what format the signal corresponds to and if it is the correct protocol and code.
Featured Products
General BAR silver - simple remote control
General ZOOMY Remote control with big buttons for seniors, kids
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.